HueFlex IP20 tape‑to‑driver connector: clear, tool‑free strip‑to‑driver link for OrionPRO LED tape. Compact design, 6 A capacity, IP20, extended warranty. 🔑 Key Features 🔄 Flexible tape‑to‑tape connector designed for OrionPRO IP20 strip ranges 🛠  Install tool‑free: push-in copper prongs make contact 🎯 Designed specifically for the OrionPRO IP20 tape system 🔍 Clear polycarbonate housing blends with light installations ⚡ Handles up to 6 A continuous load 📏 Slim profile: 4.6 mm high × 9.9 mm wide × 161.6 mm long 🚫 Class II double‑insulation - no earth required 🔁 Secure, solder-free electrical continuity 🛠  Enables rewiring or reconfiguration with minimal effort 🧰 Ideal for retrofit transforms or neat new installs 🏠 Fits cabinet, shelf, and architectural strip lighting 🧩 Enables clean tape-to-driver junctions without bulky wiring 🛡️ 2-year warranty for peace of mind

Read more less

This T/L (Tape-to‑Tape / Tape-to‑Line) connector is designed exclusively for the OrionPRO IP20 LED tape range. It enables a tool-free join between two tape ends or to a live feed via separate solder-free contacts. Made with clear polycarbonate housing and copper contacts, it supports up to 6 A and includes a 3 year extended warranty. Compact and lightweight, it’s perfect for discreet LED strip lighting installations. 🔑 Key Features ⚡ Rated for up to 6 A current, suitable for extended linear runs 💡  No soldering or tools required - push-in installation 🔌 Designed for T‑junction connections between OrionPRO LED tapes 🧴  Clear polycarbonate body for discreet appearance 📐 Compact dimensions: 4.9 mm H × 17.2 mm W × 20.05 mm L 🚫 Class II double‑insulation - no earth required 🔁 Enables quick maintenance or reconfiguration of installations ✅ Provides consistent, reliable electrical continuity 🧱 Suitable for linear or “pot‑light” style Orion runs 🧪 No glues or adhesives - pure mechanical connection 🎯 Ideal for cabinet lighting, shelving, architectural detailing 🛡️ 3-year warranty for peace of mind

Read more less

OrionPRO IP20 tape‑to‑driver connector: clear, tool‑free strip‑to‑driver link for OrionPRO LED tape. Compact design, 6 A capacity, IP20, extended warranty. 🔑 Key Features 🔌 Connector for linking OrionPRO IP20 strip to LED driver 🛠  Install tool‑free: push-in copper prongs make contact 🎯 Designed specifically for the OrionPRO IP20 tape system 🔍 Clear polycarbonate housing blends with light installations ⚡ Handles up to 6 A continuous load 📏 Slim profile: 4.6 mm high × 9.9 mm wide × 161.6 mm long 🚫 Class II double‑insulation - no earth required 🔁 Secure, solder-free electrical continuity 🛠  Enables rewiring or reconfiguration with minimal effort 🧰 Ideal for retrofit transforms or neat new installs 🏠 Fits cabinet, shelf, and architectural strip lighting 🧩 Enables clean tape-to-driver junctions without bulky wiring 🛡️ 2-year warranty for peace of mind

Read more less

This T/L (Tape-to‑Tape / Tape-to‑Line) connector is designed exclusively for the OrionPRO IP20 LED tape range. It enables a tool-free join between two tape ends or to a live feed via separate solder-free contacts. Made with clear polycarbonate housing and copper contacts, it supports up to 6 A and includes a 3 year extended warranty. Compact and lightweight, it’s perfect for discreet LED strip lighting installations. 🔑 Key Features ⚡ Rated for up to 6 A current, suitable for extended linear runs 💡  No soldering or tools required - push-in installation 🔌 Designed for T‑junction connections between OrionPRO LED tapes 🧴  Clear polycarbonate body for discreet appearance 📐 Compact dimensions: 4.9 mm H × 17.2 mm W × 20.05 mm L 🚫 Class II double‑insulation - no earth required 🔁 Enables quick maintenance or reconfiguration of installations ✅ Provides consistent, reliable electrical continuity 🧱 Suitable for linear or “pot‑light” style Orion runs 🧪 No glues or adhesives - pure mechanical connection 🎯 Ideal for cabinet lighting, shelving, architectural detailing 🛡️ 3-year warranty for peace of mind

Read more less

This compact tape-to-tape connector provides a seamless and tool‑free way to join two sections of IP20 LED tape. It uses sharp metal prongs to pierce and clamp the copper conductors, ensuring a secure electrical connection. Housed in clear polycarbonate, it supports up to 6 A and works with all OrionPRO IP20 strip configurations. 🔑 Key Features ⚡ Rated for up to 6 A current, suitable for extended linear runs 💡  No soldering or tools required - push-in installation 🔌 Designed for joining two sections of OrionPRO IP20 LED tape 🧴  Clear polycarbonate body for discreet appearance 📐 Compact dimensions: 3.7 mm H × 9.8 mm W × 13.5 mm L 🚫 Class II double‑insulation - no earth required 🔁 Enables quick maintenance or reconfiguration of installations ✅ Provides consistent, reliable electrical continuity 🧱 Suitable for linear or “pot‑light” style Orion runs 🧪 No glues or adhesives - pure mechanical connection 🎯 Ideal for cabinet lighting, shelving, architectural detailing 🛡️ 2-year warranty for peace of mind

Read more less

The PRO 5 m LED Tape Kit delivers around 1,710 lm at 3000 K warm white, offering flexible, dimmable ambient lighting with integrated driver and 3M® self-adhesive backing for easy installation. This low-profile, cuttable tape is ideal for detailing under cabinets, shelves, displays, and kitchen atmospheres. It’s energy-efficient (≈90 lm/W), Class II rated, and includes a 2+1-year extended warranty. 🔑 Key Features 💡 Warm white 3000 K colour tone ⚡ 5 W per metre, total 19 W LED power 🔆 1710 lumens output (~90 lm/W efficiency)  🧵 5 m continuous roll, vertically cuttable every 4 cm 🎛️ Compatible with standard dimmers (dimmable tape) 🚪 Self-adhesive 3 M® backing for tool‑free mounting ✂️ Ultra-slim profile: 1.3 mm thick × 8 mm wide 🏠 Suitable for cabinet lighting, shelving, under-counter highlights, and display units 🔌 Integrated LED driver included in kit 📏 Cut-to-length flexibility (every 4 cm) for custom runs 🕒 Long 35,000‑hour lifespan 📐 180º wide beam angle 🛠 Supplied with mounting clips and connectors for a complete install 💦 IP20-rated, for dry indoor environments only 🎯 High CRI ≥ 80 for natural colour rendering ⚡️ Class II insulation – no earth required 📄  Fully compliant - UKCA & CE 🛡️  Backed by 3‑year fitting warranty

Read more less

The 3X5 Corridor Sensor Bulkhead is ideal for indoor and sheltered outdoor use. Its integrated LEDs offer 3 selectable wattages (8 W, 14 W, 16 W) and five CCT colour temperatures (2700 K to 6500 K) via switch, delivering up to 120 lm/W. With IP65 weather protection, IK08 impact resistance, and Class II design, it's perfect for corridors, stairwells, communal areas, HMOs, utility areas, and more. Installation is flexible thanks to rear and side 20 mm conduit entries and push‑fit terminals UKCA & CE Declaration of ConformityBHCE3X5CH-CF Data Sheet 🔑 Key Features 💡 3 power modes: switch between 8 W / 14 W / 16 W 🌡 5 selectable CCTs: 2700 K / 3000 K / 4000 K / 5000 K / 6500 K ⚡ Ultra-efficient LEDs rated at ~120 lumens per watt 🔆 1800 lumens output - super bright energy efficient light  🏨 Suitable for commercial, domestic and HMO use 🔄 Side conduit entries - 4×20 mm side entries for flexible wiring 🚫 Non-dimmable 🎛️ Driver included - inside fitting 📐 Beam angle: ~120° wide spread light 🕒 Long 50,000‑hour lifespan 📏 Dimensions: Ø 316 mm × Depth 74 mm 🏠 Ideal for bathroom zones 1 & 2 compliance 🧰 Push‑fit terminal block for quick, tool‑free connections 💦 IP65-rated, fully water‑resistant for indoor & sheltered outdoor areas ♒︎  Sensor coverage: 360° ceiling / 150° wall detections ⏳  Sensor time delay: stand-by period 0s / 1min / 5min / 10min / +∞ 🌜  Light threshold control: Disable / 2 lux / 25 lux / 50 lux 🔨 IK08 impact protection to resist knocks and bumps 🎯 High CRI ≥ 80 for natural colour rendering ⚡️ Class II insulation – no earth required 📄  Fully compliant - UKCA & CE 🎨 Gloss-black - polycarbonate diffuser and body 🛡️  Backed by 5‑year fitting warranty

Read more less

The 3X5 is a robust round LED corridor sensor bulkhead light ideal for indoor and outdoor use. Its integrated LEDs offer 3 selectable wattages (8 W, 14 W, 16 W) and five CCT colour temperatures (2700 K to 6500 K) via switch, delivering up to 120 lm/W, built-in 3‑hour emergency battery to provide reliable illumination during power outages. With IP65 weather protection, IK08 impact resistance, and Class II design, it's perfect for corridors, stairwells, communal areas, HMOs, utility areas, and more. Installation is flexible thanks to rear and side 20 mm conduit entries and push‑fit terminals UKCA & CE Declaration of ConformityBHCE3X5CH-CFEM Data Sheet 🔑 Key Features 💡 3 power modes: switch between 8 W / 14 W / 16 W 🌡 5 selectable CCTs: 2700 K / 3000 K / 4000 K / 5000 K / 6500 K ⚡ Ultra-efficient LEDs rated at ~120 lumens per watt 🔆 1800 lumens output - super bright energy efficient light  🏨 Suitable for commercial, domestic and HMO use 🔄 Side conduit entries - 4×20 mm side entries for flexible wiring 🚫 Non-dimmable 🎛️ Driver included - inside fitting 🔋  Integrated 3‑hour emergency battery for power-loss backup 🔄 Maintained and non‑maintained emergency operation modes 📐 Beam angle: ~120° wide spread light 🕒 Long 50,000‑hour lifespan 📏 Dimensions: Ø 316 mm × Depth 74 mm ♒︎  Sensor coverage: 360° ceiling / 150° wall detections ⏳  Sensor time delay: stand-by period 0s / 1min / 5min / 10min / +∞ 🌜  Light threshold control: Disable / 2 lux / 25 lux / 50 lux 🧰 Push‑fit terminal block for quick, tool‑free connections 💦 IP65-rated, fully water‑resistant for indoor & sheltered outdoor areas 🔨 IK08 impact protection to resist knocks and bumps 🎯 High CRI ≥ 80 for natural colour rendering ⚡️ Class II insulation – no earth required 📄 Fully compliant - UKCA & CE 🎨 Polished-chrome - polycarbonate diffuser and body 🛡️ Backed by 5‑year fitting warranty

Read more less

The 3X5 Microwave Sensor Bulkhead is ideal for indoor and sheltered outdoor use. Its integrated LEDs offer 3 selectable wattages (8 W, 14 W, 16 W) and five CCT colour temperatures (2700 K to 6500 K) via switch, delivering up to 120 lm/W. With IP65 weather protection, IK08 impact resistance, and Class II design, it's perfect for corridors, stairwells, communal areas, HMOs, utility areas, and more. Installation is flexible thanks to rear and side 20 mm conduit entries and push‑fit terminals UKCA & CE Declaration of ConformityBHCE3X5CH-MW Data Sheet 🔑 Key Features 💡 3 power modes: switch between 8 W / 14 W / 16 W 🌡 5 selectable CCTs: 2700 K / 3000 K / 4000 K / 5000 K / 6500 K ⚡ Ultra-efficient LEDs rated at ~120 lumens per watt 🔆 1800 lumens output - super bright energy efficient light  🏨 Suitable for commercial, domestic and HMO use 🔄 Side conduit entries - 4×20 mm side entries for flexible wiring 🚫 Non-dimmable 🎛️ Driver included - inside fitting 📐 Beam angle: ~120° wide spread light 🕒 Long 50,000‑hour lifespan 📏 Dimensions: Ø 316 mm × Depth 74 mm 🏠 Ideal for bathroom zones 1 & 2 compliance 🧰 Push‑fit terminal block for quick, tool‑free connections 💦 IP65-rated, fully water‑resistant for indoor & sheltered outdoor areas ♒︎  Sensor coverage: 360° ceiling / 150° wall detections ⏳  Sensor time delay: adjustable from ~5 sec to 10 min 🌜  Light threshold control: Disable / 2 lux / 25 lux / 50 lux 🔨 IK08 impact protection to resist knocks and bumps 🎯 High CRI ≥ 80 for natural colour rendering ⚡️ Class II insulation – no earth required 📄  Fully compliant - UKCA & CE 🎨 Polished-chrome – polycarbonate diffuser and body 🛡️  Backed by 5‑year fitting warranty

Read more less

The 3X5 is a robust round LED bulkhead light ideal for indoor and sheltered outdoor use. Its integrated LEDs offer 3 selectable wattages (8 W, 14 W, 16 W) and five CCT colour temperatures (2700 K to 6500 K) via switch, delivering up to 120 lm/W. With IP65 weather protection, IK08 impact resistance, and Class II design, it's perfect for corridors, stairwells, communal areas, HMOs, utility areas, and more. Installation is flexible thanks to rear and side 20 mm conduit entries and push‑fit terminals. UKCA & CE Declaration of ConformityBHCE3X5BL-ST Data Sheet 🔑 Key Features 💡 3 power modes: switch between 8 W / 14 W / 16 W 🌡 5 selectable CCTs: 2700 K / 3000 K / 4000 K / 5000 K / 6500 K ⚡ Ultra-efficient LEDs rated at ~120 lumens per watt 🔆 1800 lumens output - super bright energy efficient light  🏨 Suitable for commercial, domestic and HMO use 🔄 Side conduit entries - 4×20 mm side entries for flexible wiring 🚫 Non-dimmable 🎛️ Driver included - inside fitting 📐 Beam angle: ~120° wide spread light 🕒 Long 50,000‑hour lifespan 📏 Dimensions: Ø 316 mm × Depth 74 mm 🏠 Ideal for bathroom zones 1 & 2 compliance 🧰 Push‑fit terminal block for quick, tool‑free connections 💦 IP65-rated, fully water‑resistant for indoor & sheltered outdoor areas 🔨 IK08 impact protection to resist knocks and bumps 🎯 High CRI ≥ 80 for natural colour rendering ⚡️ Class II insulation – no earth required 📄  Fully compliant - UKCA & CE 🎨 Gloss-black – polycarbonate diffuser and body 🛡️  Backed by 5‑year fitting warranty

Read more less

The 3X5 is a robust round LED corridor sensor bulkhead light ideal for indoor and outdoor use. Its integrated LEDs offer 3 selectable wattages (8 W, 14 W, 16 W) and five CCT colour temperatures (2700 K to 6500 K) via switch, delivering up to 120 lm/W, built-in 3‑hour emergency battery to provide reliable illumination during power outages. With IP65 weather protection, IK08 impact resistance, and Class II design, it's perfect for corridors, stairwells, communal areas, HMOs, utility areas, and more. Installation is flexible thanks to rear and side 20 mm conduit entries and push‑fit terminals UKCA & CE Declaration of ConformityBHCE3X5BL-CFEM Data Sheet 🔑 Key Features 💡 3 power modes: switch between 8 W / 14 W / 16 W 🌡 5 selectable CCTs: 2700 K / 3000 K / 4000 K / 5000 K / 6500 K ⚡ Ultra-efficient LEDs rated at ~120 lumens per watt 🔆 1800 lumens output - super bright energy efficient light  🏨 Suitable for commercial, domestic and HMO use 🔄 Side conduit entries - 4×20 mm side entries for flexible wiring 🚫 Non-dimmable 🎛️ Driver included - inside fitting 🔋  Integrated 3‑hour emergency battery for power-loss backup 🔄 Maintained and non‑maintained emergency operation modes 📐 Beam angle: ~120° wide spread light 🕒 Long 50,000‑hour lifespan 📏 Dimensions: Ø 316 mm × Depth 74 mm ♒︎  Sensor coverage: 360° ceiling / 150° wall detections ⏳  Sensor time delay: stand-by period 0s / 1min / 5min / 10min / +∞ 🌜  Light threshold control: Disable / 2 lux / 25 lux / 50 lux 🧰 Push‑fit terminal block for quick, tool‑free connections 💦 IP65-rated, fully water‑resistant for indoor & sheltered outdoor areas 🔨 IK08 impact protection to resist knocks and bumps 🎯 High CRI ≥ 80 for natural colour rendering ⚡️ Class II insulation – no earth required 📄 Fully compliant - UKCA & CE 🎨 Gloss-black – polycarbonate diffuser and body 🛡️ Backed by 5‑year fitting warranty

Read more less

The 3X5 Corridor Sensor Bulkhead is ideal for indoor and sheltered outdoor use. Its integrated LEDs offer 3 selectable wattages (8 W, 14 W, 16 W) and five CCT colour temperatures (2700 K to 6500 K) via switch, delivering up to 120 lm/W. With IP65 weather protection, IK08 impact resistance, and Class II design, it's perfect for corridors, stairwells, communal areas, HMOs, utility areas, and more. Installation is flexible thanks to rear and side 20 mm conduit entries and push‑fit terminals UKCA & CE Declaration of ConformityBHCE3X5BL-CF Data Sheet 🔑 Key Features 💡 3 power modes: switch between 8 W / 14 W / 16 W 🌡 5 selectable CCTs: 2700 K / 3000 K / 4000 K / 5000 K / 6500 K ⚡ Ultra-efficient LEDs rated at ~120 lumens per watt 🔆 1800 lumens output - super bright energy efficient light  🏨 Suitable for commercial, domestic and HMO use 🔄 Side conduit entries - 4×20 mm side entries for flexible wiring 🚫 Non-dimmable 🎛️ Driver included - inside fitting 📐 Beam angle: ~120° wide spread light 🕒 Long 50,000‑hour lifespan 📏 Dimensions: Ø 316 mm × Depth 74 mm 🏠 Ideal for bathroom zones 1 & 2 compliance 🧰 Push‑fit terminal block for quick, tool‑free connections 💦 IP65-rated, fully water‑resistant for indoor & sheltered outdoor areas ♒︎  Sensor coverage: 360° ceiling / 150° wall detections ⏳  Sensor time delay: stand-by period 0s / 1min / 5min / 10min / +∞ 🌜  Light threshold control: Disable / 2 lux / 25 lux / 50 lux 🔨 IK08 impact protection to resist knocks and bumps 🎯 High CRI ≥ 80 for natural colour rendering ⚡️ Class II insulation – no earth required 📄  Fully compliant - UKCA & CE 🎨 Gloss-black - polycarbonate diffuser and body 🛡️  Backed by 5‑year fitting warranty

Read more less

The 3X5 Microwave Sensor Bulkhead is ideal for indoor and sheltered outdoor use. Its integrated LEDs offer 3 selectable wattages (8 W, 14 W, 16 W) and five CCT colour temperatures (2700 K to 6500 K) via switch, delivering up to 120 lm/W. With IP65 weather protection, IK08 impact resistance, and Class II design, it's perfect for corridors, stairwells, communal areas, HMOs, utility areas, and more. Installation is flexible thanks to rear and side 20 mm conduit entries and push‑fit terminals UKCA & CE Declaration of ConformityBHCE3X5-MW Data Sheet 🔑 Key Features 💡 3 power modes: switch between 8 W / 14 W / 16 W 🌡 5 selectable CCTs: 2700 K / 3000 K / 4000 K / 5000 K / 6500 K ⚡ Ultra-efficient LEDs rated at ~120 lumens per watt 🔆 1800 lumens output - super bright energy efficient light  🏨 Suitable for commercial, domestic and HMO use 🔄 Side conduit entries - 4×20 mm side entries for flexible wiring 🚫 Non-dimmable 🎛️ Driver included - inside fitting 📐 Beam angle: ~120° wide spread light 🕒 Long 50,000‑hour lifespan 📏 Dimensions: Ø 316 mm × Depth 74 mm 🏠 Ideal for bathroom zones 1 & 2 compliance 🧰 Push‑fit terminal block for quick, tool‑free connections 💦 IP65-rated, fully water‑resistant for indoor & sheltered outdoor areas ♒︎  Sensor coverage: 360° ceiling / 150° wall detections ⏳  Sensor time delay: adjustable from ~5 sec to 10 min 🌜  Light threshold control: Disable / 2 lux / 25 lux / 50 lux 🔨 IK08 impact protection to resist knocks and bumps 🎯 High CRI ≥ 80 for natural colour rendering ⚡️ Class II insulation – no earth required 📄  Fully compliant - UKCA & CE 🎨 Gloss-white – polycarbonate diffuser and body 🛡️  Backed by 5‑year fitting warranty

Read more less

The Ultra Sensor 2‑in‑1is a plug‑and‑play microwave sensor designed to convert compatible CE3X5 bulkhead fittings (standard or emergency versions) into motion‑activated units. With full programmability and no wiring modifications, this compact accessory integrates seamlessly into existing fittings. 🔑 Key Features 💾 Plug-and-play installation - simple and retrofit-friendly 🧰 Retrofit ready - ideal when installing into existing luminaires 🎯 Built‑in microwave / corridor motion sensor compatible with CEX3X5 bulkheads 📊 Ceiling-mounted detection: up to Ø 6 m × 3 m height. 🧱 Wall-mounted detection: up to 12 m × 2 m height. 🌐 360° ceiling / 120° wall detection angles for flexible mounting. 💡 Adjustable light sensitivity (2–50 lux) to set ambient threshold. 📏 Adjustable output dimming range: 10%–100% light level. ⏱ Time delay customization: 5 seconds to 30 minutes. ⚡ Operates on standard 220–240 V mains. ✔ Class II double‑insulated - no earth required. 📐 Dimensions: Height: 18 mm × Width: 51 mm × Depth:  27 mm 🛡️ 5 year warranty

Read more less

The LUN5‑EM is a compact plug & play emergency lighting module designed for seamless integration with CE3X5 series. Fitted with a LiFePO₄ 3.2 V, 1500 mAh battery, it delivers up to 3 hours emergency runtime, automatically activating when mains power fails. 🔑 Key Features 🔋 Integrated 3-hour emergency backup for safe egress in power failure 💾 Plug-and-play installation - simple and retrofit-friendly 🧰 Retrofit ready - ideal when installing into existing luminaires 🔄 LiFePO₄ battery (3.2 V, 1500 mAh) for long lifespan and safety 💡  Compatible with CE3X5 bulkheads 🧪 Designed to meet emergency lighting safety standards 🔌 Supports 20–55 V output range 📐 Dimensions: Height: 50 mm × Width: 130 mm × Depth: 75 mm 🛡️ 2 year warranty

Read more less

Fire-rated, IP65 downlight with integrated LED module offering selectable wattage (5 or 7W) and colour temperatures (2700/3000/4000/6000 K). Ideal for bathrooms, kitchens, or any shallow-ceiling installations. 🔑 Key Features 💼 Trade Pack - 10 pcs pack for bulk ordering 🔄 Power-selectable: 5 or 7W 💡 Up to 750 lm output (~107 lm/W) 🌡️ 4CCT adjustable: 2700 / 3000 / 4000 / 6000 K 🎚️ Dimmable (with compatible LED dimmers) 🔥 Fire-rated – certified for 30/60/90 min ceilings 🛋️ Insulation compatible: suitable for covering with insulation 270mm 📐 60º wide beam angle ✂️ Cut-out: 68 mm | Depth: 50 mm | Diameter: 89 mm 🏠 IP65 rated – suitable for bathrooms zones 1 & 2 🧱 Steel/aluminium/acrylic construction ⏳ ~30,000 hr lifespan ⚡️ Class II - double insulation 🎨 Matt white finish – minimalist elegance 🛡️ Extended 2+3 yr warranty (5 years)

Read more less

The Trimless Bezel Square is an accessory designed to provide a seamless, plastered finish for ShieldLED or ShieldECO downlights. The steel bezel is installed flush within the ceiling during plastering, allowing the matching downlight to be fitted later without visible trim. Finished in matt white and IP20-rated—perfect for modern, minimalistic interiors. 🔑 Key Features ✅ Ensures professional finish without visible trims or rings ⏱   Fits build sequence: plaster first, install downlight later 🔧 Suitable for new builds and retrofit projects alike ✂️ Cut-out: 89 x 89 mm │ Diameter: 135 mm │ Depth: 40 mm 🛠️ Steel construction - for durability 🎨 Matt white finish – minimalist ceiling look 🛡️ 2-year warranty for peace of mind 💼 Bezel only - requires ShieldECO or ShieldLED downlight

Read more less

The Trimless Bezel Round is an accessory designed to provide a seamless, plastered finish for ShieldLED or ShieldECO downlights. The steel bezel is installed flush within the ceiling during plastering, allowing the matching downlight to be fitted later without visible trim. Finished in matt white and IP20-rated—perfect for modern, minimalistic interiors. 🔑 Key Features ✅ Ensures professional finish without visible trims or rings ⏱   Fits build sequence: plaster first, install downlight later 🔧 Suitable for new builds and retrofit projects alike ✂️ Cut-out: 85 mm │ Diameter: 135 mm │ Depth: 40 mm 🛠️ Steel construction - for durability 🎨 Matt white finish – minimalist ceiling look 🛡️ 2-year warranty for peace of mind 💼 Bezel only - requires ShieldECO or ShieldLED downlight

Read more less

A slim-profile, commercial-grade recessed downlight featuring anti‑glare design and gloss white finish. It accepts a max 50 W GU10 reflector lamp (bulb not included), is dimmable, and made from sturdy steel. Designed with a minimal 2 mm projection and compact 84 mm diameter, it gives a clean, discreet lighting solution. Requires a cut-out of 75 mm and 220–240 V mains. Ideal for retail or office spaces needing refined recessed lighting. 🔑 Key Features 💡 50W GU10 fixed downlight – lamp not included 🔅 Anti‑glare design keeps the bulb source hidden 🎚️ Dimmable (with compatible GU10 bulbs) 🏢 Ideal for commercial environments like offices or shops 🏠 IP20 rated – indoor use only ✂️ Cut-out: 75 mm │ Diameter: 84mm │ Depth: 106 mm 📏 Ultra low profile – only 2 mm projection from ceiling 🧱 Steel construction delivers stability and style ⚡️ Class I - earth required ✅ Simple installation with included fixing accessories 🔄 220–240 V mains compatibility 🎨 Gloss white finish – minimalist elegance 🛡️ 2-year warranty for peace of mind

Read more less

A compact and efficient constant current LED driver designed to power a wide range of LED downlights and panels. With selectable output currents and flicker-free dimming, this unit is ideal for reliable, energy-efficient installations in commercial and residential settings. 🔑 Key Features 🔄 Selectable current output: 550  / 600 / 650 / 700 mA (via DIP switch) 💡 28 W max output power – supports a range of LED fittings 🎛️ Triac dimmable & Flicker-free – compatible with trailing-edge dimmers ✅ Flicker-free performance across all dimming levels ⚙️ Output voltage range: 25–40 V DC ⚡ High power factor ≥ 0.9 for energy efficiency 🔧 Max output current: 700 mA 📈 Efficiency ≥ 79% 🌟 High power factor: ≥ 0.9 at full load ❄️ Operating temp range: –30°C to +50°C 🔌 Supports wide input voltage: 220–240 VAC, 50/60 Hz 🔋 Low standby current drain for energy savings 🔌 Integrated driver – no external power supply needed 📋 Standards compliant: ENEC, SELV, RoHS, CE 🧠 Smart DIP switch for simple configuration 🧱 IP20 rated – suitable for dry indoor environments 🏠 Class II insulation – no earth required 📦 Ideal for downlights, spotlights, and LED panels 🛡️ 5‑year warranty (2+3)

Read more less

Reliable emergency backup made easy. This compact 2‑in‑1 emergency kit converts downlights or panels into self‑test or standard maintained units, delivering emergency light for up to 3 hours in power failure. 🔑 Key Features 🔋 2 in 1 standard & self-test operation – tandard or automatic self-test functionality 🕒 3-hour emergency duration – provides power during outages 💡 Maintained emergency fitting – keeps lighting active on mains failure ⚡ DC output 2.5 W at 20 – 55 V /  Input voltage: 220–240 VAC, 50/60 Hz 🔗 Plug-and-play wiring – simplifies setup 🔌 Supports 20–55 V output range 📐 Dimensions: H 30 mm × W 43 mm × L 200 mm | Weight ~0.3 kg 📋 Complies with EN 62034 self‑test requirements 🛠️ Tested to EN 60598-2-22 & EN 61347-2-7 standards 🔧 Output voltage range: DC 20–55 V, SELV compliant 🔁 Recharge current: 300 mA │ Recharge time: 24 hours 🔄 Output power (constant): 2.5 W 🌟 Lumen factor: 140 lm/W – excellent efficiency 🔋 Battery: LiFePO4 3.2V 3200 mAh (10.24 Wh) 🏠 Class I insulation – earth required 🛡️ Extended 2+3 year warranty (5 years total)

Read more less

A high-performance, fully adjustable LED downlight with selectable colour temperature — ideal for retail and commercial spaces. Integrated COB LED delivers 900 lm at 86 lm/W, while the 355° swivel and 60° tilt enable precise beam pointing. 🔑 Key Features 💡 Integrated 10.5 W COB LED (SMD 2835 chip) 🎨 Selectable CCT: 3000K / 4000K / 6000K 🔄 Adjustable 355° rotation + 60° tilt for directional lighting 🔆 900 lumens output (86 lm/W) 🚫 Non-dimmable 📐 24º wide beam angle 🎛️ Driver included 📐 120° wide beam angle ✂️ Cut-out: 77 mm | Depth: 75 mm | Diameter: 90 mm 🏠 IP20 rated – indoor use only ⚡️ Class II insulation – no earth required 🎨 Matt-black die-cast aluminium – clear PC diffuser 🛡️ Extended 2+3 yr warranty (5 years)

Read more less

A high-performance, fully adjustable LED downlight with selectable colour temperature — ideal for retail and commercial spaces. Integrated COB LED delivers 1400 lm at 93 lm/W, while the 355° swivel and 60° tilt enable precise beam pointing. 🔑 Key Features 💡 Integrated 15 W COB LED (SMD 2835 chip) 🎨 Selectable CCT: 3000K / 4000K / 6000K 🔄 Adjustable 355° rotation + 60° tilt for directional lighting 🔆 1400 lumens output (93 lm/W) 🚫 Non-dimmable 📐 24º wide beam angle 🎛️ Driver included 📐 120° wide beam angle ✂️ Cut-out: 90 mm | Depth: 92 mm | Diameter: 102 mm 🏠 IP20 rated – indoor use only ⚡️ Class II insulation – no earth required 🎨 Matt-black die-cast aluminium – clear PC diffuser 🛡️ Extended 2+3 yr warranty (5 years)

Read more less

A high-performance, fully adjustable LED downlight with selectable colour temperature — ideal for retail and commercial spaces. Integrated COB LED delivers 2800 lm at 93 lm/W, while the 355° swivel and 60° tilt enable precise beam pointing. 🔑 Key Features 💡 Integrated 30 W COB LED (SMD 2835 chip) 🎨 Selectable CCT: 3000K / 4000K / 6000K 🔄 Adjustable 355° rotation + 60° tilt for directional lighting 🔆 2800 lumens output (93 lm/W) 🚫 Non-dimmable 📐 24º wide beam angle 🎛️ Driver included 📐 120° wide beam angle ✂️ Cut-out: 125 mm | Depth: 125 mm | Diameter: 140 mm 🏠 IP20 rated – indoor use only ⚡️ Class II insulation – no earth required 🎨 Matt-black die-cast aluminium – clear PC diffuser 🛡️ Extended 2+3 yr warranty (5 years)

Read more less

Bring a modern touch to your interior with this fixed GU10 downlight in a polished chrome finish. Ideal for bedrooms, kitchens, hallways, or commercial spaces, it fits a standard 50W GU10 lamp (not included) and is dimmable when used with a compatible bulb and dimmer. Its low-profile design offers a clean, flush fit for a minimalist look. 🔑 Key Features 💡 50W GU10 fixed downlight – lamp not included 🚿 IP20 rated – suitable for dry indoor spaces 🎚️ Dimmable (with compatible GU10 lamp) ✂️ Cut-out: 70 mm | Depth: 45 mm | Diameter: 80 mm 📏 Requires minimum void depth ~95 mm 🧱 Die-cast aluminium alloy - construction ⚡️ Class II - double insulation 🎨 Polished chrome bezel – ideal for feature displays 🛡️ 2-year warranty for peace of mind

Read more less

Bring a modern touch to your interior with this fixed GU10 downlight in a matt black finish. Ideal for bedrooms, kitchens, hallways, or commercial spaces, it fits a standard 50W GU10 lamp (not included) and is dimmable when used with a compatible bulb and dimmer. Its low-profile design offers a clean, flush fit for a minimalist look. 🔑 Key Features 💡 50W GU10 fixed downlight – lamp not included 🚿 IP20 rated – suitable for dry indoor spaces 🎚️ Dimmable (with compatible GU10 lamp) ✂️ Cut-out: 70 mm | Depth: 45 mm | Diameter: 80 mm 📏 Requires minimum void depth ~95 mm 🧱 Die-cast aluminium alloy - construction ⚡️ Class II - double insulation 🎨 Matt-black bezel – ideal for feature displays 🛡️ 2-year warranty for peace of mind

Read more less

The Anti‑Glare white downlight with black nickel insert offers a modern, practical solution for wet and fire-rated areas. Its anti-glare lens reduces eye strain, while selectable CCT ensures flexibility across different room atmospheres. Installation is hassle-free, and with built-in compliance for fire and IP65 standards, this downlight boosts both installation speed and installation safety. 🔑 Key Features 🔄 Power-selectable: 5W or 7W 💡 Up to 650 lm output (~93 lm/W) 🌡️ 3CCT adjustable: 2700 / 3000 /  4000 / 6000 K 🎚️ Dimmable (with compatible dimmer switches) 🔥 Fire-rated – certified for 30, 60 & 90 min ceilings 🛋️ Insulation coverable: tested with insulation cover thickness 270mm 📐 60º wide beam angle ✂️ Cut-out: 75 mm | Depth: 70 mm | Diameter: 94 mm 🏠 IP65 rated – suitable for bathrooms zones 1 & 2 🧱 Steel & acrylic construction ⏳ ~30,000 hr lifespan ⚡️ Class II - double insulation 🎨 Matt white finish with black nickel insert – minimalist elegance 🛡️ Extended 2+3 yr warranty (5 years)

Read more less

The Anti‑Glare white downlight with chrome insert offers a modern, practical solution for wet and fire-rated areas. Its anti-glare lens reduces eye strain, while selectable CCT ensures flexibility across different room atmospheres. Installation is hassle-free, and with built-in compliance for fire and IP65 standards, this downlight boosts both installation speed and installation safety. 🔑 Key Features 🔄 Power-selectable: 5W or 7W 💡 Up to 650 lm output (~93 lm/W) 🌡️ 3CCT adjustable: 2700 / 3000 /  4000 / 6000 K 🎚️ Dimmable (with compatible dimmer switches) 🔥 Fire-rated – certified for 30, 60 & 90 min ceilings 🛋️ Insulation coverable: tested with insulation cover thickness 270mm 📐 60º wide beam angle ✂️ Cut-out: 75 mm | Depth: 70 mm | Diameter: 94 mm 🏠 IP65 rated – suitable for bathrooms zones 1 & 2 🧱 Steel & acrylic construction ⏳ ~30,000 hr lifespan ⚡️ Class II - double insulation 🎨 Matt white finish with black insert – minimalist elegance 🛡️ Extended 2+3 yr warranty (5 years)

Read more less

The Anti‑Glare white downlight with chrome insert offers a modern, practical solution for wet and fire-rated areas. Its anti-glare lens reduces eye strain, while selectable CCT ensures flexibility across different room atmospheres. Installation is hassle-free, and with built-in compliance for fire and IP65 standards, this downlight boosts both installation speed and installation safety. 🔑 Key Features 🔄 Power-selectable: 5W or 7W 💡 Up to 650 lm output (~93 lm/W) 🌡️ 3CCT adjustable: 2700 / 3000 /  4000 / 6000 K 🎚️ Dimmable (with compatible dimmer switches) 🔥 Fire-rated – certified for 30, 60 & 90 min ceilings 🛋️ Insulation coverable: tested with insulation cover thickness 270mm 📐 60º wide beam angle ✂️ Cut-out: 75 mm | Depth: 70 mm | Diameter: 94 mm 🏠 IP65 rated – suitable for bathrooms zones 1 & 2 🧱 Steel & acrylic construction ⏳ ~30,000 hr lifespan ⚡️ Class II - double insulation 🎨 Matt white finish with chrome insert – minimalist elegance 🛡️ Extended 2+3 yr warranty (5 years)

Read more less

The Anti‑Glare downlight offers a modern, practical solution for wet and fire-rated areas. Its anti-glare lens reduces eye strain, while selectable CCT ensures flexibility across different room atmospheres. Installation is hassle-free, and with built-in compliance for fire and IP65 standards, this downlight boosts both installation speed and installation safety. 🔑 Key Features 🔄 Power-selectable: 5W or 7W 💡 Up to 650 lm output (~93 lm/W) 🌡️ 3CCT adjustable: 2700 / 3000 /  4000 / 6000 K 🎚️ Dimmable (with compatible dimmer switches) 🔥 Fire-rated – certified for 30, 60 & 90 min ceilings 🛋️ Insulation coverable: tested with insulation cover thickness 270mm 📐 60º wide beam angle ✂️ Cut-out: 75 mm | Depth: 70 mm | Diameter: 94 mm 🏠 IP65 rated – suitable for bathrooms zones 1 & 2 🧱 Steel & acrylic construction ⏳ ~30,000 hr lifespan ⚡️ Class II - double insulation 🎨 Matt white finish – minimalist elegance 🛡️ Extended 2+3 yr warranty (5 years)

Read more less